Juniper-systems Allegro CE Quick Start Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Juniper-systems Allegro CE Quick Start. Juniper Systems Allegro CE Quick Start User Manual [en] [de] [cs] Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Step 1
Insert the battery pack into the Allegro
1. Push up on the release latches on the sides of
the Allegro to open the battery compartment
door.
2. Place the NiMH battery pack in the left side of
the battery compartment, push down, and
slide it all the way to the right.
Step 2
Close and latch the battery door
1. Push the battery door closed until each release
latch clicks into place.
2. Slide the release latches downward until they
cannot slide any further to securely latch the
battery door closed.
Do not turn on the Allegro yet.
Step 3
Plug the charger into the wall
1. Plug the AC wall charger that came with the
Allegro into the wall socket.
The small green light on the wall adapter
turns on when it is plugged into the wall.
Step 4
Plug the charger into the Allegro
1. Remove the rubber protector from the Allegro’s
external power input jack.
2. Plug the power connector end of the charger
into the Allegro.
Step 5
Turn the Allegro on
1. Push the On/Off button on the Allegro.
As Windows CE loads, a progress bar is
shown that does not require any action until it
gets to the Set Main Battery Parameters screen.
Step 6
Fill out the Set Main Battery Parameters
screen and charge the battery pack
1. Set the charge to 10% and tap on OK.
2. Charge the installed battery pack for 3 to 4
hours. This is to ensure the batteries are
charged to full capacity.
Allegro CE
TM
Field PC Quick Start Guide
Complete all of the steps in this guide before using your Allegro CE
1
2
Résumé du contenu
Page 1 - Field PC Quick Start Guide
Step 1Insert the battery pack into the Allegro1. Push up on the release latches on the sides ofthe Allegro to open the battery compartmentdoor.2. Plac
Page 2 - Agriculture
Step 7Set time and dateDouble tap on the clock on your Allegro’sdesktop. Complete the following steps:1. Tap on the correct day on the Date tab.2. Tap
Produits connexes et manuels pour Équipement Juniper-systems Allegro CE Quick Start
(274 pages)
(145 pages)
(151 pages)
(1 pages)
(2 pages)Electrolux ECP4140 manuals
Owner’s manuals and user’s guides for Fridge-freezers Electrolux ECP4140.
We providing 1 pdf manuals Electrolux ECP4140 for download free by document types: User Manual
Commentaires sur ces manuels